Physical-chemical and microbiological performances of graphene-doped PMMA for CAD/CAM applications before and after accelerated aging protocols

Abstract

ObjectivesInnovative, nanotechnologies-featuring dental materials for CAD/CAM applications are becoming available. However, the interaction with the oral environment poses critical challenges to their longevity. The present study evaluated specific physical-chemical properties and antimicrobial potential of a CAD/CAM graphene-doped resin before and after accelerated aging protocols. MethodsGraphene nanofibers (GNF)-doped (<50 ppm) PMMA (GPMMA) and control PMMA CAD/CAM discs were used. Specimens underwent aging procedures of their bulk (thermo- and load-cycling) and surface (24 h-immersion in absolute ethanol), then they were tested for flexural strength, ultimate tensile strength, sorption/solubility, and methyl-methacrylate elution. Surface characterization included x-ray diffraction, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, surface roughness, microhardness, and scanning electron microscopy (SEM). Adherence of Streptococcus mutans and Candida albicans, and biofilm formation (continuous-flow bioreactor) by the same strains and an artificial oral microcosm were investigated. ResultsGNF-doping improved the physical-chemical bulk properties of the PMMA resin. Surface aging reduced microhardness and increased the roughness of both test and control materials. Surfaces displayed signs of swelling and degradation at SEM. Microbiological data of non-aged surfaces showed that GNF-doping significantly reduced biofilm formation by all tested strains despite having no impact on microbial adherence. After aging, microbial adherence was higher on GPMMA surfaces, while biofilm formation was not promoted. SignificanceGNF-doping improved the material’s performance and influenced its antimicrobial potential. This strategy seems a valuable option to overcome the effects of surface degradation induced by aging on the antimicrobial potential of PMMA resin.