Abstract
The performance of the microaeration hydrolytic acidification (MAHA) process and microbial community were investigated under different organic loading rates (OLRs) for the pretreatment of 2-butenal manufacture wastewater (2-BMW). Results indicated that OLRs had different impact on the performance of MAHA process. More than 23.7 ± 2.3% of the chemical oxygen demand (COD) removal and the highest acidification degree (20.9 ± 3.1%) were obtained when OLRs were less than 4.0 ± 0.1 kgCOD/m3 d. However, further increasing OLRs to 6.1 ± 0.1 kgCOD/m3 d subsequently led to the significant reductions of COD removal and acidification degree. In addition, it could be preliminarily inferred that 2H-pyran-2-one tetrahydro-4-(2-methyl-1-propen-3-yl), 5-formyl-6-methyl-4,5-dihydropyran and ethyl sorbate were the main refractory and toxic organics for microorganisms in the wastewater. The soluble microbial product (SMP) and extracellular polymeric substance (EPS) contents (protein, polysaccharide, nucleic acid) had obvious changes under different OLRs. With parallel factor (PARAFAC) model, four fluorescent components were identified. The Fmax of protein-like substances in SMP significantly decreased with increasing OLRs to 6.1 ± 0.1 kgCOD/m3 d, which might attribute to fluorescence quenching. Illumina MiSeq sequencing revealed that Pseudomonas, Longilinea, T78, Clostridium, WCHB1-05, Acinetobacter, SHD-231 and Oscillospira were dominant genera at different OLRs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have