Performance evaluation of a novel single-screw compressor and expander design

Abstract

Single-screw machines have seen significant development and improvement over the last decades and they are currently employed as both compressors and expanders in several applications. The correct functioning of the machine heavily relies on the meshing between the gate rotors and the central rotor which is directly linked to the precision of the manufacturing process to avoid unexpected wear of the tooth profiles. It is well known that the wear of the gate rotor tooth profiles over time is one of the limiting factors with respect to twin-screw machines. To this end, a number of studies have been reported in the literature about improved tooth profiles. For instance, the conventional straight-line profile has been replaced by multi-column tooth flank designs to enlarge the contact surface. However, the manufacturing process is still based on CNC machines with associated challenges.In a previous study, the authors proposed and modeled a new tooth profile design to overcome the aforementioned limitations. In particular, 3D printing technique was utilized to manufacture the non-conventional tooth design. A geometry model has also been developed to calculate the sealing lines, groove volume curves, and surface areas of the new design.In this work, a detailed mechanistic model of the single-screw machine is exercised to compare the conventional straight-line profile with the newly proposed tooth profile. Particular emphasis is given to the effect of seal lines on the leakage flows. Furthermore, the design implications of the new tooth profile on internal volume ratio, porting, and displacement are also discussed.