Abstract
Microstrip antennas generally have deficiency with small bandwidth, so that their utilization is very minimal and rarely used for antenna user applications on electronic devices. To increase antenna performance parameters bandwidth, voltage standing wave ratio, and return loss, need modification of antenna. This research was carried out by modifying of microstrip antenna with the meader line technique by ground plane wich is useful for increasing performance of microstrip antenna parameters. The ground plane on antenna was modified by adding a copper wire to the antenna. With modifications to ground plane antenna, the antenna performance parameters bandwidth, voltage standing wave ratio and return loss have decreased significantly. Antenna bandwidth has 124 MHz before modification, but has increased upto 214 MHz after modification ground plane, voltage standing wave raio has decreased from 1.835 to 1.12 after modifications ground plane antenna, and return loss of antenna before modification has -10.112 dB, after modification it decreased significanty upto -24.69 dB.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.