Partial discharge induced decomposition and by-products generation properties of HFO-1234ze(E)/CO2: a new eco-friendly gas insulating medium

Abstract

HFO-1234ze(E) is introduced as a new eco-friendly insulating gas for medium-voltage gas-insulated equipment (MV-GIE). However, there are few reports on the partial discharge (PD) induced decomposition and gaseous, solid by-product generation characteristics of HFO-1234ze(E)/CO2. Herein, the PD decomposition characteristics of HFO-1234ze(E)/CO2 were explored based on a needle-plate electrode that simulates the metal protrusion defect in MV-GIE. The partial discharge inception voltage, and phase-resolved partial discharge of HFO-1234ze(E)/CO2 under different mixing ratios, PD intensity and duration time at 0.15 MPa were obtained. Meanwhile, the PD-induced decomposition and generation of gaseous, solid by-products of HFO-1234ze(E)/CO2 were analyzed. A three-zone pattern that describes the gas–solid metal interface interaction was proposed for the first time. It is found that the increase of HFO-1234ze(E) content brings superior insulation performance, while the precipitation of gaseous (CF4, C2F6, CHF3, C3HF7) and solid by-products gradually aggravated. In order to avoid the negative impact of PD-induced decomposition on the insulation and service life of MV-GIE, the optimal HFO-1234ze(E) content of 30% is recommended. Based on the optimal mixing ratio (30% HFO-1234ze(E)/70% CO2), the effect of gas pressure and electrode materials on solid precipitation, breakdown voltage was also explored. This work guides the development of HFO-1234ze(E) based MV-GIE and understanding the solid by-products precipitation mechanism of eco-friendly insulating gas.