Abstract
Background: This retrospective study aimed to investigate the physicochemical properties of drinking water sources in Ethiopia and compare the water quality with the health-based target. For this purpose, the water quality database of Ethiopian Public Health Institute (EPHI) from 2010 to 2016 was used. Methods: The concentration and other properties of the water samples were analyzed according to the Standard Methods of Water and Wastewater analysis. Quality control and quality assurance were applied in all stages following our laboratory standard operation procedures (SOPs). Results: The concentration of the selected parameters varied based on the type of water sources. The mean concentration of turbidity was higher in spring water (21.3 NTU) compared to tap (12.6 NTU) and well (3.9 NTU) water sources. The mean concentration of total dissolved solids (TDS), electrical conductivity (EC), sodium (Na+), and sulfate (SO4 -2) was found to be higher in spring water sources than tap and well water sources. Comparably, the concentration of hardness, calcium, and magnesium was found to be higher in well water sources than spring and tap water sources. The bivariate analysis indicated that out of 845 analyzed water samples, more than 50% of the samples from Oromia region had turbidity, pH, TDS, hardness, Ca++, K+, and Na+ within an acceptable limit. In addition, the logistic regression analysis showed that water quality parameters were strongly associated with the type of water sources and regional administration at P<0.05. Conclusion: More than 80% of the samples analyzed from drinking water sources were in agreement with WHO guidelines and national standards. However, the remaining 20% specifically, pH (25%), calcium (20%), hardness (18.1%), TDS (15.5%), and turbidity (13.3%) analyzed from improved water sources did not comply with these recommendations. Due to objectionable or unpleasant taste, people may force to look for alternative unprotected water sources that lead to health concerns.
Highlights
Drinking water quality parameters are often the most important tools for measuring access to improved water sources
Due to objectionable or unpleasant taste, people may force to look for alternative unprotected water sources that lead to health concerns
Most of the parameters including turbidity, total dissolved solids (TDS), electrical conductivity (EC), Na+, Cl, and SO4-2 were found to be higher in spring water samples compared to well and tap water samples
Summary
Drinking water quality parameters are often the most important tools for measuring access to improved water sources. The drinking water with an acceptable quality shows the water safety in terms of its physical, chemical and bacteriological parameters [1]. Consumers’ perceptions of quality have a great value in their drinking water safety. Consumers can have different opinion towards aesthetic values of drinking water quality based on taste, odor, and appearance. Having a good knowledge of the factors that influence This retrospective study aimed to investigate the physicochemical properties of drinking water sources in Ethiopia and compare the water quality with the health-based target. For this purpose, the water quality database of Ethiopian Public Health Institute (EPHI) from 2010 to 2016 was used
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
