Abstract
The study investigated the effect of the amount of selected retardant coatings produced and used in the Slovak Republic on the fire resistance of spruce wood samples. Experiments were conducted for two different types of flame retardants: intumescent flame retardant (IFR) and inorganic salt-based flame retardant (IS). Based on different amounts of coating applied to spruce wood samples, the important parameters as mass loss, mass loss rate and fire spread rate were determined. The experiment consisted of applying a flame source to the samples at an angle of 45° and monitoring the mass of the samples during the experiment. The findings show that when IFR is used, the protection effect of the wooden samples increases linearly with the amount of coating. However, for the samples on which an IS flame retardant was applied, a higher amount of coating had no effect on increasing the fire resistance of the wood. In this case, the average total mass loss was the same regardless of the amount of coating, yet a significant retardation effect was observed compared to the untreated samples. Samples treated with IFR showed a lower total mass loss and also a significantly lower maximum mass loss rate compared to the samples with applied IS flame retardant.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
