Abstract

Passive lighting design plays an important role in providing natural lighting to save electricity consumption in buildings. This study aims to investigate the performance of natural lighting and the potential of alternative designs through sidelights with 3 shading device models and light shelves with different sizes in north, west, east, and south orientations. This research method is quantitative, which describes the measurement results in existing conditions and radiance illuminance software simulations. The results showed that at the beginning of field measurements, it was known that there were rooms with lighting intensity too high, too low, and uneven distribution. The simulation results use Radiance Illuminance software to determine the illuminance value of light distribution into space in the morning, afternoon, and evening. Improvised designs are applied with shading device models on the building envelope, namely horizontal, vertical, and egg-crate models in spaces oriented toward the East and West. This study also applied an interior-exterior light self-model measuring 50 cm, 100 cm, and 150 cm of space with the orientation of window openings towards the North and South. The simulation results in this study, show that without a shading device and using a horizontal model, there will be a decrease of 0.4% at a distance of 2 m from window openings oriented to the East, while to the West will be able to increase the illuminance value by 11.5% at a distance of 10.5 m from the window opening. Buildings without using light self and using interior-exterior light shelves measuring 50 cm can increase the illuminance value by 0.5% at a distance of 10.5 m from window openings in a space oriented towards the North, while the orientation towards the south, which can be increased the illuminance value by 0.4% at a distance of 6 m from the window opening. Based on this research analysis, it concluded that the best-improvised design in rooms oriented toward North and South is a 50 cm interior-exterior light shelf and horizontal shading device models are the best for spaces oriented to the East and West. This study, also concluded that the orientation of the building, the passive device model, and the distance of the measuring point in the building envelope, affect the intensity and distribution of daylight entering the building.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.