Optical design of multilayer antireflection coatings for indoor solar cell applications.

Abstract

Multilayer antireflection coatings (ARCs) for solar cells are conventionally designed to enhance the photocurrent level obtained at normal incidence. This is mainly because outdoor solar panels are usually placed such that they can receive strong midday sunlight at a nearly vertical angle. However, in the case of indoor photovoltaic devices, the direction of light changes considerably with changes in the relative position and angle between the device and light sources; therefore, it is often difficult to predict the incident angle. In this study, we explore a method to design ARCs suitable for indoor photovoltaics by essentially taking into account the indoor lighting environment, which is different from the outdoor conditions. We propose an optimization-based design strategy that aims to enhance the average level of the photocurrent generated when a solar cell receives irradiance randomly from all directions. We apply the proposed method to design an ARC for organic photovoltaics, which are expected to be promising indoor devices, and numerically compare the resultant performance with that obtained using a conventional design method. The results demonstrate that our design strategy is effective for achieving excellent omnidirectional antireflection performance and allows the realization of practical and efficient ARCs for indoor devices.