Abstract
This paper addresses and evaluates the temperature dependence performance of silicon carbide (4H-SiC) based insulated gate bipolar transistors (IGBTs) using two dimensional numerical computer aided design tool (i.e., Atlas TCAD from Silvaco). Using identical set of device physical parameters (doping, thicknesses), simulated structure was first caliberated with the experimental data. A minority carrier life time in the drift layer of 1.0 – 1.6 µs and contact resistivity of 0.5 - 1.0 x 10-4 Ω-cm2 produces a close match with the experimental device. A set of n type IGBT structures were then numerically simulated to extract the conduction losses for various blocking voltage classes. An on-resistance first decays with temperature (i.e., increased in ionization level, and increase in minority carrier life time), stays nearly constant with further increase in the temperature (may be all carriers are now fully ionized and increase in carrier life time is compensated with decrease in the carrier mobility) and finally increases linearly with temperature (>450 oC) due to decrease in the carrier mobility. Compared with Si based IGBTs, numerical simulation predicts lower VCEON and RON values for 4H-SiC based IGBTs for higher voltage classes and hence potential for achieving smaller conduction losses for SiC based IGBTs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.