Abstract

Lead is a global priority pollutant. Its presence in aquatic systems is harmful to the human health. Fluoride is essential to the human body, especially in dental health. However, excess fluoride in the body can lead to serious health concerns. Therefore, a simple approach to monitoring lead and fluoride in environmental samples is paramount. In this study, we synthesized N and S co-doped carbon quantum dots under the hydrothermal method by employing citric acid, glutamine, and sodium sulphide (Na2S) as precursors. Characterization of the developed nanosensor was carried out using Fourier transform infrared spectroscopy (FTIR), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL) spectrophotometer, ultraviolet–visible spectroscopy (UV–Vis), and X-ray diffraction (XRD). The as-prepared nanosensor is spherical with an average particle diameter of 3.45 ± 0.86 nm and emits light in the green region of the spectrum. This material was employed as an ‘on–off’ and ‘off–on’ fluorescent sensor to determine Pb2+ and F− rapidly and selectively. The fluorescence was quenched (turned off) in the presence of Pb2+ because of the strong interaction between Pb2+ ions and the surface functional groups of the as-synthesized material. Subsequently, the quenched fluorescence of the N, S-CQDs + Pb2+ system was restored (turned on) upon the introduction of F− ions, owing to the formation of ionic bonds between Pb2+ and F−. The N S-CQDs were selective towards Pb2+. At the same time, the N, S-CQDs + Pb2+ system exhibited selectivity towards F− ions amidst other ions with low detection limits (LODs) of 13.35 nM and 43.17 nM for Pb2+ and F−, respectively. The dynamic quenching mechanism was suggested based on the absorption spectra and lifetime results. Satisfied recoveries of 89.30–116.40% for Pb2+ and 90.22–115.05% for F- (RSD < 5) were obtained in practical samples of wastewater and fish. We believe that the as-synthesized N S-CQDs can effectively serve as reliable, accurate, and swift nanosensor for detecting Pb2+ and F− in environmental samples.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.