Numerical simulation of ultrasonic impact treatment (UIT) assisted laser directed energy deposition (DED) CrCoNi medium entropy alloy process

Abstract

In order to enhance the microstructure and mechanical properties of additively manufactured metal parts, the application of ultrasonic impact treatment (UIT) after the additive manufacturing process is introduced as a means to modulate and optimize the material's microstructure and properties. This study systematically investigates the effect of UIT on the distribution of residual stresses in CrCoNi medium entropy alloy (CrCoNi-MEA) through numerical simulation. A suitable finite element model and boundary conditions are established to simulate the UIT assisted laser DED process. The reliability of the finite element model is verified by XRD residual test results and EBSD observation results. The numerical simulation results shows that the specimen's surface exhibited predominantly compressive stress within a specific depth range, with the maximum compressive stress in the vertical direction. Furthermore, it is observed that UIT amplitude, frequency, and impact needle diameter also significantly influenced the residual stresses. By appropriately adjusting the UIT parameters, the magnitude and distribution of residual stresses could be further controlled and regulated. In addition, it is found that multiple UITs at different surface locations exhibited no significant mutual influence between each other.