Noncontact ultrasonic transportation of small objects in a circular trajectory in air by flexural vibrations of a circular disc.

Abstract

We have developed a noncontact ultrasonic technique for transporting small objects with a linear trajectory over long distances using a bending vibrating plate and a reflector. In this paper, noncontact transportation of small particles around a circular trajectory was investigated. A circular aluminum plate with a piezoelectric ring was employed as a vibrating plate. On the basis of finite element analysis (FEA) calculations, the electrodes of the piezoelectric ring were divided into 24 pieces to generate a flexural vibration mode with one nodal circle and four nodal lines at the resonance frequency of 47.8 kHz. A circular plate having the same dimensions as the vibrating plate was installed parallel to the vibrator. It was used as a reflector to generate an acoustic standing wave in the air between the two plates. The acoustic field between the vibrating plate and reflector was calculated by FEA and the distribution of the acoustic radiation force acting on a small rigid particle was calculated to predict the position of the trapped particle. Using a prototype of the vibrating plate, polystyrene particles with diameters of several millimeters could be trapped at regular intervals along the horizontal nodal line of the standing wave. The sound pressure distribution between the vibrating plate and reflector was measured by a fiber optic probe and the experimental and calculated results showed good agreement. By switching the driving conditions of the divided electrodes in the circumferential direction, the nodal lines of the vibrating plate could be rotated and the trapped particle could be manipulated with a circular trajectory in air.