Abstract
AbstractPolyvinyl alcohol (PVA) nanocomposites were made using two different cellulose nanocrystals (CNCs). Sugarcane bagasse‐based CNC and a commercial CNC were used in preparing nanocomposites. Both types of nanocomposites were prepared by solution casting method at 5 wt% CNC. PVA and nanocomposites films were also stretch‐drawn four times to study the nature of reinforcement by two different CNCs. Fourier transform infrared spectroscopy was used to examine functional group characteristics. Nanocomposite morphology and crystalline structures were analyzed using a scanning electron microscope and X‐ray diffraction, respectively. Thermogravimetric analysis and differential scanning calorimetry were used to study thermal properties. Tensile properties were used to study mechanical properties. Commercial CNC reinforcement improves the tensile properties of PVA. However, laboratory CNC reinforcement decreases the tensile properties of PVA due to nanocrystal agglomeration and uneven dispersion. All stretch‐drawn nanocomposite films showed a significant increase in tensile strength and modulus values at the expense of strain at break. Water absorption of PVA/commercial CNC nanocomposites was slightly higher than that of pure PVA.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.