Modulation of wetting state switching of droplets on superhydrophobic microstructured surfaces by external electric field

Abstract

HypothesisElectrowetting on conventional dielectrics requires direct fluid-electrode contact to generate strong electric fields at the three-phase contact line to modulate the wetting. Since the electric field alters wetting, the modulation of wetting can be achieved by applying an external electric field through insulated electrodes, preventing the liquid from contacting the electrodes. ExperimentA simple and efficient method for non-contact between the fluid and the electrode external electric field modulation of fluid wetting was proposed. The switching ability of droplets on microgroove surfaces from Cassie-Baxter to Wenzel wetting state under an external electric field was used to drive and quantify the relationship between wetting, contact angle, and the applied voltage. FindingsApplying an external electric field modulates the wetting of deionized water, ionic liquids, and high-viscosity liquids on microgrooves. The wetting degree of liquid can be controlled by adjusting the external voltage parameters. The finite element simulations revealed that the Maxwell force drove this process. The effects of substrate size and liquid properties on wetting behavior were also examined. Post-application cross-sectional imaging showed the formation of a conformal interface, highlighting the relevance of the proposed method in advanced adaptive shape fabrication and microfluidic control, among other applications.