Abstract
The manufacture of bevel and cylindrical spur gears by the means of applying hot or cold bulk forming processes is a quite widespread production method due to its well-known basic advantages, such as material and time cost reduction and the increased strength of the teeth. However, the associated process planning and tool design are more complicated compared with those of other conventional forging or rolling technologies. This paper aims at a concise description of some die forging operations selected as representative steps for the near-net-shape forging of spur gears. The main results are obtained on the basis of quasi-static model material experiments that have been applied to collect data needed for statistical processing or to verify some analytical solution and computer simulations. These results could be helpful in engineering practice for simple calculations in process planning design.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.