Abstract
Micro nuclear batteries are primarily designed to provide long-term, stable power supplies for microdevices operating in extreme environments. Currently, increasing the power output of nuclear batteries is essential for their broader application. This study investigates the output characteristics of the gallium nitride (GaN)-based PIN junction betavoltaic battery powered by 147Pm radioactive sources. Based on Monte Carlo (Geant4) and technology computer-aided design (TCAD), we calculate the J-V characteristics of the betavoltaic battery under various radioactive source and transducer structural parameters. Notably, we analyze the impact of traps in the GaN on the battery output. The results indicate that when the 147Pm source thickness approaches 10 μm, the surface power output density nearly reaches its maximum. Under irradiation from a source of this thickness, and without considering transducer traps, the device achieves a maximum output power density Pmax of 35.68 ± 0.3 μW/cm2 and a device energy conversion efficiency ηd of 6.69% ± 0.06%, significantly surpassing the output of 63Ni-based cells. Considering transducer traps, Pmax decreases to 22.81 μW/cm2. The acceptor trap H1 (energy level: Ev + 0.86 to 0.88) formed during the growth process is found to be the primary factor reducing battery performance.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call