Abstract

Two new continuous flow systems for the production of dialkyl succinates were developed via the esterification of succinic acid, and via the trans-esterification of dimethyl succinate. The first microwave-assisted continuous esterification of succinic acid with H2SO4 as a chemical homogeneous catalyst was successfully achieved via a single pass (ca 320 s) at 65–115 °C using a MiniFlow 200ss Sairem Technology. The first continuous trans-esterification of dimethyl succinate with lipase Cal B as an enzymatic catalyst was developed using a Syrris Asia Technology, with an optimal reaction condition of 14 min at 40 °C. Dialkyl succinates were produced with the two technologies, but higher productivity was observed for the microwave-assisted continuous esterification using chemical catalysts. The continuous flow trans-esterification demonstrated a number of advantages, but it resulted in lower yield of the target esters.

Highlights

  • Introductionsuccinic acid (SA) is mainly produced via a chemical catalytic route starting from maleic acid and maleic anhydride

  • With the depletion of oil-based resources, wood-based biomass and especially plant waste rich in lignocellulosic feedstocks appear to be the main alternatives for the production of platform molecules.Among them, succinic acid (SA) as a linear C-4 dicarboxylic acid is considered as one of the top 12 prospective building blocks derived from sugars by the US Department of Energy

  • Succinic acid (SA) as a linear C-4 dicarboxylic acid is considered as one of the top 12 prospective building blocks derived from sugars by the US Department of Energy

Read more

Summary

Introduction

SA is mainly produced via a chemical catalytic route starting from maleic acid and maleic anhydride. The use of furan-derived SA at laboratory-scale using chemical process, as well as via biotechnological process (i.e., by fermentation) have been studied [1]. SA can be used as a precursor to produce different chemical intermediates [2], such as tetrahydrofuran [3], γ-butyrolactone [4], and 1,4-butanediol [5]. Different processes using chemical homogeneous catalysis [7,8,9,10], heterogeneous catalysis [11,12,13,14,15,16,17,18,19,20,21], and chemo-enzymatic reaction [22]

Methods
Results
Conclusion

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.