Abstract
Deformation of proton-irradiated chromium was investigated using micro-pillar compression and electron microscopy. After 2 MeV proton irradiation at 350 °C, four micro-pillars were prepared from a single grain on the polished specimen cross section. Depending on the distance away from the irradiated surface, hardness as a function of local damage level was studied. All pillars developed a narrow deformation band on one set of near-adjacent {110} planes, arising from closely-positioned parallel gliding. The critical resolved shear stress for gliding along 〈111〉/{110} was measured to be 59.6 MPa in unirradiated material beyond the proton range. The critical stress increased by 20 % after 0.5 dpa, and by 58 % after 1 dpa, with saturation of hardening occurring by 0.7 dpa. Post-compression characterization using transmission electron microscopy showed extensive formation of nanometer size voids in a matrix dominated by tangled dislocations. No twinning was observed. The experimental observations are in good agreement with molecular dynamics simulation of pillar compression of chromium, showing dislocation gliding along 〈111〉/{110} and 〈111〉/{112}. The continued stability of chromium for LWR application requires extension of the exposure level from 1 dpa to ∼15 dpa expected for typical fuel pin exposure.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call