Abstract
In this study, styrene-butadiene rubber (SBR) latex as a polymeric admixture was applied in lightweight expanded polystyrene (EPS) concrete. The effects of curing conditions and polymer-cement ratio on the compressive and flexural strengths of polymer-modified EPS concretes were investigated. As a result, the strength development of the polymer-modified EPS concretes strongly depends on the curing conditions. Combined dry and wet curings enable to develop both the strengths of cement matrix and SBR films together. Inclusion of SBR latex at a certain polymer-cement ratio in the EPS concrete improves the bonds between the cement matrix and EPS particles due to the SBR films formed in the cement matrix. In addition, SBR modification can significantly improve the flexural strength of the normal EPS concrete. Compared with the EPS concrete, the compressive strength of the polymer-modified EPS concretes can increase gradually even after 28 days.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
