Mechanical properties of cement mortar with gamma-irradiated recycled plastic powder, pellet, and fiber

Abstract

Listen

Translate article

This study aimed to investigate the impact of gamma irradiated recycled polyethylene terephthalate (PET) pellets, powder, and fibers on the mechanical performance and ductility of cementitious mortar. The sensitivity to gamma irradiation was explored by varying the irradiation rate and total dose. The recycled PET additives employed in this experiment consisted of pellets and their different application forms: powder and fiber, containing 30 % recycled raw materials polymerized through a chemically recycled method. For comparison, plain mortar composite and virgin PET mortar composite were used as controls. When PET pellets partially replaced the aggregate, the compressive strength of the composite decreased significantly as the volume fraction of pellets increased. Conversely, specimens partially replaced by PET powder showed an overall increase in compressive strength compared to the control specimens, regardless of the volume fraction of powder, gamma irradiation rate, or total dose, with no change in ductility. To assess changes in tensile strength and ductility of the recycled PET fibers under different gamma irradiation rates and total doses, direct fiber tensile tests were conducted. The gamma-irradiated fiber specimens exhibited a slight increase in strength and ductility. This information allowed for the calibration of the tensile material constitutive relationship of PET fibers, which was subsequently used in nonlinear finite element analysis. The study also investigated the variation in direct tensile, compressive, and flexural strengths with different volume fractions of fiber. The results indicated that the strength enhancement was minimal, but the direct tensile and flexural tensile analyses predicted an enhancement.