Abstract
The Monte Carlo simulation (MCS) method for uncertainty evaluation of measurement results has gained popularity as an alternative to the method based on law of propagation of uncertainty (LPU) ever since the recommendation by JCGM through supplement JCGM 101:2008. In this paper, efforts have been made to compute the uncertainty in measurement of hardness in the Vickers hardness scale using MCS and LPU method. Three different hardness blocks of different hardness scales, namely HV1, HV10 and HV30, have been calibrated following the standard procedure in the primary Vickers hardness machine established in CSIR-National Physical Laboratory. The mean hardness values and the associated measurement uncertainty of the hardness blocks are computed using LPU and MCS methods. A comparison of the results obtained through LPU and MCS methods has been carried out. It is observed that there is a good agreement between findings from both the methods adopted, hence confirming that MCS method can be employed in the various fields of hardness metrology for evaluation of measurement uncertainty.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have