Manufacturing and Application of Continuous Cast Semi-Solid Processed Magnesium Alloys

Abstract

The demand for magnesium alloys has increased significantly during the past decade in the automotive and electronic industries where weight reduction becomes increasingly an important issue. At present, high-pressure die casting (HPDC) is a dominant process in production of magnesium alloy components. However, magnesium alloy components produced by HPDC suffer from porosity problem and this limits the enhancement of mechanical properties through subsequent heat treatments. The semi-solid processing (SSP) is an emerging new technology for near-net shape production of engineering components, in which the alloys are processed in the temperature range where the liquid and solid phases coexist. The SSP has various advantages over the conventional casting processes. It offers the castings with high integrity and less porosity and allows subsequent heat treatments for enhancement of mechanical properties. For these advantages, the SSP of magnesium alloys has received increasing attention in recent years. In the present study, the continuous casting process was developed for the production of magnesium billets for the subsequent SSP. The process utilizes an electromagnetic stirring system in order to obtain desired microstructure with an excellent degree of homogeneity in both microstructure and composition. Prototypes of an air conditioner cover and a telescope housing were produced using the SSP of the continuously cast magnesium alloy billets.