Abstract
Semi-solid processing is recognized as an attractive alternative method for the near net-shape production of engineering components. Although there has been a significant progress in semi-solid processing of aluminum alloys, very limited information is available on semi-solid processing of magnesium alloys, except for the thixomolding process. Continuous casting process has been utilized to produce the billets with the desirable cross-section at a reduced production cost for many metals, such as steel, copper and aluminum alloys. It has also been commercially utilized to produce the aluminum billets with non-dendritic microstructure for subsequent thixocasting process. However, continuous casting of magnesium billets for semi-solid processing has not yet been commercialized due to the difficulties involved in casting of magnesium alloys. In the present study, a continuous casting process has been developed for the production of the cylindrical billets of magnesium alloys for the subsequent thixocasting process. In order to obtain the desired non-dendritic microstructure with an excellent degree of homogeneity both in microstructure and composition, an electromagnetic stirring system has been utilized. A continuous casting process has been proven to be an efficient way to produce the high quality billets of magnesium alloys for semi-solid processing. A prototype air conditioner cover was produced using the continuously cast billets of AZ91 alloy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
