Abstract
The magnetic and magnetoelectric (ME) properties of as-deposited and annealed BaTiO3–CoFe2O4 nanocomposite films with CoFe2O4 (CFO) nano-rods embedded in a BaTiO3 matrix have been studied and compared. The BaTiO3 phase in the as-deposited film changed from (0 0 1) preferred orientation to (1 0 0) orientation after annealing at 950 °C for 2 h. In the meantime, the magnetization increased dramatically from 200 to 380 emu cm−3. Distinct changes in magnetic contrast of the CFO nano-rods were observed by magnetic force microscopy under application of an electric field to the composite film. ME voltage coefficient as large as 4.9 × 10−9 s m−1 or 1.2 V Oe−1 cm−1 was estimated for the annealed film under 10 MV m−1, although the value was much lower for the as-deposited film. It is shown that higher ME effects can be found in films with good phase homogeneity, poly-domains and unrelaxed stress.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.