Abstract
As the density and operating speed of complementary metal oxide semiconductor (CMOS) circuits increases, dynamic power dissipation has become a critical concern in the design and development—of personal information systems and large computers. The reduction of supply voltage, node capacitance, and switching activity are common approaches used in conventional CMOS. In adiabatic switching circuits, the current flow through transistors can be significantly reduced by ensuring uniform charge transfer over the entire available time. This paper presents the simulation of this current in two-phase clocked adiabatic static CMOS logic (2PASCL) and conventional CMOS. From the SPICE simulations, at transition frequencies from 1 to 12MHz, a 4×4-bit array 2PASCL multiplier shows a maximum reduction in power dissipation of 77% relative to that of a static CMOS. The measurement results of a 4×4-bit array 2PASCL multiplier demonstrate a 57% reduction compared to a 4×4-bit array two-phase clocked adiabatic dynamic CMOS logic (2PADCL). These results indicate that 2PASCL technology can be advantageous when applied to low-power digital devices operated at low frequencies, such as radio-frequency identification (RFID) tags, smart cards, and sensors.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.