Abstract
In this study, a new wafer bonding method for MEMS (micro electro mechanical systems) packaging is presented. The seal lines of sub-micron size Au particles with a width of 50μm were formed on wafers by means of screen-printing. The bonding process was carried out at 300°C under reduced pressure, 1×10−3mbar. The bonded wafers were diced into 5mm×5mm individual chips. The bond strength of each chips was about 20MPa measured by a tensile test and about 40MPa by a shear test in the average. It was confirmed that two wafers were successfully bonded with screen-printed Au particle seal lines. The proposed method can be applied to practical MEMS packaging.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
