Abstract
The synthetic fiber manufacturing wastewater (FMW) contained large amounts of tetrahydrofuran (THF), 3-buten-1-ol (BDO) and 1,4-butanediol (BTO) and showed a high chemical oxygen demand (COD) of 7,992 ± 2,252 mg L−1. Ratio of the biological oxygen demand (BOD5) and COD of the FMW stream was analyzed as only 0.094, which reflected the low aerobically biodegradable property. For complementing existed aerobic biological treatment process, an external circulation sludge bed (ECSB) system consisting of two full-scale anaerobic granular sludge (AnGS) bioreactors was constructed and continuous operation for more than 25 months. Even though feed fluctuations occurred, robust performance of the system was exhibited with consistent high removals of COD (85.5 ± 4.4%), THF (79.8 ± 8.6%), BDO and BTO (both 100%). Fractionation analyses of AnGS at nine heights of the two bioreactors showed that the bigger size (>0.5 mm) dominated at the bottom (>92.1%). Morphology and elemental analyses of AnGS were helpful to see surface depositions in line with water analyses. Anaerobic biodegradations were also highlighted in a comprehensive analysis of carbon and nitrogen fractions, phosphates, sulfates and other minerals. Moreover, metagenomic analyses revealed Methanomicrobia and Methanosaeta in archaea and Exilispira in bacteria were the dominant genera in microbial community structure, which given more insights of anaerobic biodegradation in the two full-scale bioreactors.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call