Lead-Free Ferroelectric Ba0.9Sr0.1TiO3 Coupled Polysulfide Trapping on Sulfur Cathode in Stable and High Energy Density Lithium-Sulfur (Li-S) Batteries

Abstract

In the present work we are reporting electrochemical performance of Lead-free ferroelectric Ba0.9 Sr0.1TiO3 (BST), a high polarization (~14.58 μC/cm2 ) material, to assist polysulfide chemisorption via their permanent dipoles. The performance of fabricated cathodes in terms of structural, electronic, morphological, and electrochemical characteristics have been carried out with various concentrations of ferroelectric inclusion. X-ray diffraction analysis revealed tetragonal symmetry (c/a=1.0073) and the Raman spectroscopic studies confirmed A1(TO1), A1(TO2), A1(TO3) and A1(LO3) optical modes of the tetragonal phase of the BST modified composites. All the compositional cations were observed in SEM-based EDAX analysis, confirming homogeneous distribution of BST in the sulfur cathode system having grain sizes of ~ 1-1.5 μm. The porosity in the composites were found to be negligible based on the microscopic analysis. Considering that polar substances have good affinity towards trapping polysulfides and that can provide more stable reacting environment in the cathodic site, ferroelectric BST was employed to trap such polysulfide intermediates due to possessing permanent dielectric polarizability. With the spontaneous polarization induced by composite structure, ferroelectric material provides internal electric fields and increase chemisorption with the reactive heteropolar material. Thus, BST coupled C-S composite cathodes improved the electrochemical performance in comparison with the cathodes composed of only C-S. A stable high capacity of 1200 mAh/g was achieved for the BST coupled C-S cathodes in contrast to 700 mAh/g in pristine C-S cathode, due to reduction in polysulfides migration influence by the electric field of the BST ferroelectric. Two plateaus were observed, namely at 1.5 V and 3 V in the charge/discharge characteristics. The detail results will be presented at the ECS meeting 2023.