An Effective Polysulfide Trapping Strategy for the Development of a Scalable, High Energy Density Lithium-Sulfur Battery

Abstract

Rechargeable lithium-sulfur (Li-S) batteries represent an attractive, “beyond Li-ion”, battery technology because they offer a high specific energy of 2,500 Wh/kg at the material level1 and 550 Wh/kg at the cell level.2 However, Li-S batteries face substantial technical challenges that have thus far prevented the realization of the battery’s tremendous performance potentials.3 One of the major technical challenges is low practical specific capacity and fast performance degradation due to the formation, migration, and shuttling of intermediate lithium polysulfides (PSs). Several strategies have been used to trap the PS species either chemically or physically; however, they either incur increased cost due to the use of expensive catalysts4 or suffer from the reduced battery specific energy due to added inactive weights from the cell design.5,6 We will present a novel strategy to address the PS-shuttle issue using a nanolayer polymer modified high surface area carbon (NPC) as a new type of PS-trapping material.7 When thin films of NPC were coated on sulfur electrodes (NPC-S), we found that our NPC-S based Li-S battery demonstrated a high discharge specific capacity (~1,600 mAh/g) that is nearing sulfur’s theoretical specific capacity. Our molecular dynamics simulation suggests such an excellent performance is attributed to NPC’s strong PS trapping capability via dipole-dipole interactions. We will show that, using a sustainable starting material, our approach is low-cost and economically scalable for the advanced Li-S battery technology. References Zhang, S. S., Journal of Power Sources 2013, 231, 153-162.Manthiram, A.; Fu, Y.; Su, Y.-S., Accounts of Chemical Research 2013, 46 (5), 1125-1134.Chen, Z. X.; Zhao, M.; Hou, L. P.; Zhang, X. Q.; Li, B. Q.; Huang, J. Q., Advanced Materials 2022, 2201555.Hamal, D.; Awadallah, O.; El-Zahab, B., Catalysis in Lithium-Sulfur Cathodes for Improved Performance and Stability. In 242nd The Electrochemical Society Meeting, Atlanta, GA, USA, 2022.Chung, S.-H.; Han, P.; Singhal, R.; Kalra, V.; Manthiram, A., Advanced Energy Materials 2015, 5 (18).Singhal, R.; Chung, S.-H.; Manthiram, A.; Kalra, V., Journal of Materials Chemistry A 2015, 3 (8), 4530-4538.Hasan, W.; Hyynh, K.; Razzaq, A.; Smdani, G.; Shende, R.; Paudel, T.; Xing, W., "Scalable, High Energy Density Lithium-Sulfur Batteries". In NASA Battery Workshop, November 15-17, 2022 , Huntsville, AL, USA, 2022. Acknowledgment This work was supported by the Larry and Linda Pearson Endowed Chair at the Department of Mechanical Engineering, South Dakoda School of Mines and Technology and by the South Dakota Governor’s Research Center for Electrochemical Energy Storage. Figure 1