Abstract
Surface-grafting conducting polymer has advantage to circumvent the difficulty in patterning as well as the weak interface adhesion on substrate of the conventional conducting polymer, which would be desirable for its application as electrodes in electronic devices. In this work, the patterned surface-grafting polypyrrole (PPY) is used as electrode, which shows merits such as strong interface adhesion, robustness against solvent treatment, easy scaling-up, and good conductivity. Remarkably, the surface-grafting PPY electrodes can efficiently drive both p-type and n-type organic field-effect transistors. By combining p-/n-type transistors, organic complementary inverters are constructed with PPY electrodes, which exhibit low operational voltage (<8V), high gain (6–17), and low power dissipation (several tens of nW). The switching voltage is approximately 0.5Vdd with a high noise margin (>70% of 0.5Vdd). Dynamic switching measurements indicate that the inverter has an operational frequency of about 3.3kHz. This is the first report on kilohertz organic complementary inverter driven with surface-grafting conducting polymer electrodes. High device performance, together with the facile patternability and other merits, may promote the application of surface-grafting conducting polymer electrode in the field of organic electronics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.