Abstract
Abstract Curing kinetics of an industrially important printed-circuit board (PCB) base material (epoxy–phenol/glass fillers) were studied by isothermal differential scanning calorimetry (DSC) measurements between 150 and 190°C, as relevant curing temperatures for the PCB industry. The extent of cure was calculated by integration of the exothermic peak and normalization by the total heat of reaction (obtained by nonisothermal DSC). Although the cross-linking was completed above 180°C, the kinetic profiles show two regimes: one fast and one slow. The kinetic parameters have been elucidated using an isoconversional model-free kinetic method, with the exact method of Friedman, to give to the PCB manufacturers a road map to predict curing behavior of base material. The linearity of Arrhenius plots was satisfactory. The apparent activation energy of curing reaction has been found to increase with the degree of conversion. The elucidation of the kinetic parameters allows us to propose an accurate and predictive description of the curing kinetics within the fast regimen of reaction (i.e., without vitrification). Finally, we discuss how these kinetic measurements and models can be completed and optimized.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Microelectronics and Electronic Packaging
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
