Abstract

ABSTRACT In this paper, the applicability of dual material stacked gate-oxide-Pocket doped-hetero-junction tunnel field effect transistor (DMSGO-PD-HTFET) for low power switching and radio frequency (RF) applications is investigated. In this context, gate workfunction engineering, the stacked-gate-oxide (+) approach, and asymmetrical doping at the P+ source () and N+ drain regions are considered. N+ pocket at source-channel interface implements DMSGO-PD-HTFET and improves interband tunnelling rate. This research aims to improve the device’s switching ratio (/), average subthreshold swing (), and radio frequency (RF) performance. For this, the control gate work function, mole fraction (X), pocket thickness, and doping concentration are optimised. Next, the DC, analog/RF and linearity figure of merits of the proposed device is analysed and the performance is compared with conventional all-silicon dual-material stack gate oxide tunnel field effect transistor (DMSGO-TFET) and dual-material stacked gate oxide-hetero-junction tunnel field effect transistor (DMSGO-HTFET) with source using technology computer-aided design (TCAD) device simulator. Based on the comparative analysis, the optimised design with exhibits an average subthreshold swing () of 28.8 mV/decade, switching ratio (/) of 2 × 1012, cut-off frequency () of 216 (GHz), and other significant improvements in analog/RF and linearity performance parameters. The proposed device is therefore suitable for switching and RF applications.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call