Interfacial microstructure evolution and mechanical properties of TIG welding joints of AISI 304/Q235B rolled composite plates

Abstract

This study presents a comprehensive characterization of the microstructure evolution and distribution of interfacial bonding properties in the original rolled plates and a welded AISI 304/Q235B clad plates. The findings reveal that an uneven diffusion layer, rich in chromium (Cr) and nickel alloy elements, is formed at the interface of the heat-affected zone during the welding process. The thickness of the diffusion layer reaches 10 μm in the overheated region. This nonuniformity results from the dilution of alloying elements from stainless steel into carbon steel. The presence of the diffusion layer contributes to the highest microhardness value at the weld metal interface. Tensile-shear experiments indicate a 22% increase in the tensile-shear strength of the overheated zone interface compared to the base metal interface, accompanied by a 30% decrease in elongation. While the diffusion layer enhances the interface shear strength, it reduces the interface plasticity, thereby increasing the risk of fracture. Fracture analysis of the overheated zone interface reveals brittle fracture characteristics, with a small amount of Cr present. In contrast, the interface of original rolled plates displays characteristics of ductile fracture, which emphasizes the intricate interaction between brittle and ductile fracture behaviors at the interface. These observations stem from the nonuniform diffusion layer, distinct microstructure distribution, and varying rates of crack propagation.