Insights into the effect of operating parameters and hydrodynamics on hydrolysis reaction in Copper–Chlorine thermochemical water splitting cycle for hydrogen production: Modelling and experimental validation

Abstract

Copper–Chlorine (Cu–Cl) thermochemical cycle is being explored as one of the promising technologies for large scale production of clean hydrogen from water using nuclear or renewable energy. In this method, water splitting is achieved through a series of reactions in a loop producing only hydrogen and oxygen with complete recycle of all the intermediate copper and chlorine compounds. The first step of the cycle is the hydrolysis reaction wherein steam reacts with solid CuCl2 to form solid Cu2OCl2 (copper oxychloride) and HCl gas. The products enter the subsequent steps of the cycle and are recycled back to complete the loop. Multiple side reactions in the hydrolysis step result in reduced yield and loss of chemicals from the cycle. Efficient reactor design and optimal operating conditions of hydrolysis reactor is imperative towards achieving sustained closed loop operation and reducing the energy demand of Cu–Cl cycle. This paper presents a mathematical model for the simulation of hydrolysis reaction in a bubbling fluidized bed reactor. The one-dimensional model is developed based on modified two-phase theory of fluidization and is coupled with kinetics of multiple side reactions to investigate the effect of operating parameters and hydrodynamics on the conversion and yield of Cu2OCl2. The model results are validated with experimental data in 50 mm and 100 mm semi-batch fluidized bed reactors. The developed model clearly brings out the effect of different process parameters for process optimization and scale-up of the hydrolysis reactor for efficient integration in the cycle.