Abstract
The stainless steels Duplex 2205 with austenite and ferrite structure have mechanical characteristics close to those of martensite stainless steels but a better corrosion resistance; these steels are very sensitive on the heat treatments. Present work studies the cavitation erosion for those steels for three different heat treatments: simply quenched, annealed at 475°C post quenching and annealed at 875°C. The researches were undertaken at Timisoara “Politehnica” University in the Laboratory of Material Science and the Laboratory of Cavitation, using the T2 facility which integrally respects the recommendation of ASTM G32- 10 Standard. The best results were obtained with the specimens annealed at 875°C. In comparison with the stainless steel 41Cr4, with very good cavitation erosion qualities, all tested steels presented also good erosion resistance. So, Duplex 2205 steels can be used for details subjected to cavitation. The best results are obtained by increasing both the hardness and the quantity of the structure constituent with better cavitation erosion resistance, in our case the alloyed austenite.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
