In vitro testing of the bond between soft materials used for maxillofacial prostheses and cast titanium

Abstract

Statement of problem. The choice of soft materials for maxillofacial prostheses is important for covering extraoral defects after tumor surgery or radiation therapy. The use of cast commercially pure titanium as reinforcement seems to be a suitable option. Purpose. Making use of the advantages of titanium frameworks for maxillofacial prostheses requires exploring ways of combining it with soft materials. This study investigated such combinations and evaluated discoloration of the soft material to determine whether it was attributable to the titanium reinforcement. Material and methods. Five soft materials used for maxillofacial prostheses and their bond strengths to cast titanium were tested. Different ways of conditioning the titanium surface and different adhesives were used. Plain mechanical retention was also studied. The Gretag SPM 100 was used to determine the potential effects on coloring after 24 hours of radiation in the Suntest rapid exposure unit. Results. Suitable material combinations for bonding soft materials to titanium were found for all soft materials studied. Bond strength varied depending on the chemical basis of the soft material. Results indicated that maximal bond strengths were obtained by the combinations Supersoft with Super-Bond, Supersoft with subsequent silicoating, and bonding with Dentacolor connector. Few color shifts attributable to the titanium reinforcement were evident in the 2-mm layers of the soft materials applied. Conclusion. The results of this study showed that it is possible to combine a titanium framework and soft silicone materials. (J Prosthet Dent 2001;85:401-8.)