Improving stripping efficiency of double curvature surface on a setup with turret head

Abstract

The study was performed to develop a method for selecting a rational profile of a profiled flap wheel for a turret stripping head for cleaning parts with different radius of the transverse curvature. Researchers from the Irkutsk National Research Technical University and Irkutsk Aviation Plant designed and fabricated a special PFS-4 (peen forming setup) unit to implement manufacturing technology of large-scale contour-forming components. The unit is equipped with a CNC system, two movable operating elements, a shot blaster and a turret stripping head with four flap wheels. The paper offers methods and criteria for selecting the profiled flap wheel for stripping the contour-forming surfaces of the components, depending on the curvature radius of the latter. A flap wheel with an optimal curvature radius of 40 m was chosen for analysis, which allows a sufficiently large range of profile curvature of the processed components (from 8 to 40 m) to be covered. Profiled flap wheels 100 and 200 m wide with a flap profile radius of 40 m provided uniform material removal when cleaning the surface with a curvature radius from 8 to 40 m without further overlapping with a finished strip. It was shown that wider profiled flap wheels are necessary to increase stripping efficiency. In this case, a 300 mm wide flap wheel can be used for a component surface area with a transverse curvature radius over 14 m and a 400 mm wheel for surface areas with a curvature radius of over 20 m. Thus, comparing the stripping process of a curved surface by the straight flap wheel revealed that profiled flap wheels significantly expand the workability of the PFS-4 unit turret stripping head.