Generation of sodium cyanide by coal gasification for gold recovery factories

Abstract

The aim was to assess the technological feasibility of generating sodium cyanide by coal gasification, to study the effects of the process parameters (temperature, experiment duration, coal type) on the concentration of sodium cyanide in the resulting solutions, as well as to identify optimal modes of the process. Experiments were carried out on a laboratory setup consisting of a tubular cylindrical furnace equipped with a working compartment in the form of a corundum tube. Lignite and charcoal, preliminarily crushed to increase the specific surface area, were investigated. A solution of sodium cyanide was produced by sorption of gaseous hydrocyanic acid (a syngas component) with a sodium carbonate solution. A NaOH solution (pH = 10) installed in an ice bath was used in the system of absorbers. The content of sodium cyanide in the solution was determined by the titrimetric method. The HSC Chemistry 5.1 software package was used for thermodynamic calculations. During the gasification of charcoal in the temperature range 600–800oC, sodium cyanide solutions with a concentration of 0.03–0.08 wt% were obtained. An increase in temperature from 600 to 900oC led to a 4-fold decrease in the concentration of sodium cyanide in an alkaline solution, under the same duration of the experiments. A regression equation was derived for the dependence of the NaCN concentration in solution on the temperature of coal gasification and the duration of the process. It was shown that the generation of sodium cyanide by coal gasification under laboratory conditions yields sodium cyanide concentrations in solution comparable to those used for gold cyanidation at gold recovery plants. The installation of sodium cyanide generation lines directly at the production areas of gold recovery plants will reduce the production costs by eliminating expenses for purchasing, transporting and storing reagents.