Abstract
AbstractIn order to improve interfacial adhesion between poly(lactic acid) (PLA) and sisal fibers (SFs), bifunctional monomer bisoxazoline (BO) was introduced into melt‐blending process of fibers reinforced PLA composites via in situ reactive interfacial compatibilization. The morphology of fibers and their reinforced PLA composites, thermal, and mechanical properties of the composites were studied. Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM) results confirmed that PLA was successfully grafted onto the surface of fiber. BO played a hinge‐like role between PLA molecular chains and SFs. The interfacial reaction and the microstructures of the SF‐reinforced PLA composites were investigated by thermal analysis. The cold crystallization temperature of the composites increased by 6.5°C with the addition of 0.6 wt% BO and 20 wt% SF as compared with the composites without BO. Microdebonding test further confirmed that interfacial shear strength of samples with BO increased by more than 30.7% in comparison with unmodified samples. For composites with 20 wt% SF addition, tensile strength and modulus increased by 34% and 10%, respectively, with 1 wt% BO addition. Flexural strength and modulus increased by 25% and 8%, respectively, with the addition of 1.2 wt% BO. Impact strength of 1 wt% BO‐modified composites was 5.1 MPa, which is 17% higher than that of the composites without BO.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
