Improvement in the structural, magnetic and electromagnetic behaviour of barium hexaferrites with yttrium doping for EMI shielding

Abstract

Electromagnetic interference (EMI) shielding is critical for protecting electronic devices from interference generated by various sources such as power lines, radio waves, microwaves, and electronic devices. In this current study, we present a thorough investigation of the structural, magnetic, and electromagnetic properties of Y3+ doped M-type barium nano hexaferrites. Polycrystalline BaFe12−xYxO19 (x = 0.0, 0.3, 0.5, 0.7, and 0.9) hexaferrites are prepared using the citrate precursor method. The results of X-ray diffraction (XRD), Rietveld refinement and Raman spectroscopy confirmed that all samples have a single-phase, and pure hexagonal crystalline structure with space group P69/mmc. This result is consistent for all the prepared compositions. The structure and dopant materials in different chemical states of the sample are determined based on the X-ray photoelectron spectroscopy (XPS) spectrum. Field emission scanning electron microscopy (FESEM) analysis showed that the particles had a distinct hexagonal morphology. The chemical composition of the prepared hexaferrites is investigated using energy dispersive X-ray analysis (EDAX). UV spectroscopy showed an inverse relationship between the molar ratio of yttrium and the band gap. Vibrating sample magnetometer (VSM) results showed a decrease in saturation magnetization (Ms) and coercivity (Hc) with increasing fraction of yttrium ions. The shielding efficiency (SE) of the synthesized hexa materials against EMI is evaluated using a vector network analyser (VNA). In particular, effective EMI shielding was observed in the frequency spectra of 8–12 GHz (X-band region). Among the tested compositions, BaFe12–0.7Y0.7O19 with a thickness of 3 mm exhibited highest SE of 80.07 dB in the X-band region. The proposed yttrium-substituted barium M-type hexagonal ferrites exhibit significant reflection loss with enhanced absorption spectrum even when applied to an extremely thin 3 mm material, making it a possible preference as the radar-absorbed compound for EMI attenuators for weather monitoring, radar tracking, air traffic management, and gigahertz antennas. Furthermore, commercial applications including long-term magnetic media for recording, storing information, etc. are possible uses of the synthesised magnetic yttrium-doped barium M-type hexagonal ferrites.