Impact of the Heat Treatment Duration on Color and Selected Mechanical and Chemical Properties of Scots Pine Wood.

Abstract

The aim of this study was to assess the effect of the duration of heat treatment on changes in the color, as well as the chemical and mechanical properties of Scots pine sapwood. An important element of the research was to obtain the assumed temperature in the entire volume of samples. Quantitative changes in color and its components were recorded, while mechanical properties were determined in tests of compressive strength parallel and perpendicular to the grain, longitudinal tensile strength and modulus of elasticity and impact strength. The novelty of the research was to determine the above-mentioned parameters for twin samples with identical moisture contents. Chemical analyses were conducted on heat-treated wood that was subjected to heat treatment at 220 °C for a period from 1 to 8 h. Extension of the heat treatment duration resulted in the increasing darkening of the wood, as well as a further reduction in the impact strength and tensile strength parallel to the grain by approx. 40 and 50%, respectively, compared to the control wood, but also compared to heat-treated wood for a shorter treatment duration. The heat treatment of wood caused changes in the contents of the wood components, as well as the elemental composition in the heat-treated wood, compared to the control pine. The changes in the structure of the heat-treated wood were confirmed by the attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). Observed quantitative changes in the main wood components, its structural changes, as well as wood decomposition and increased crystallinity of cellulose explain significant changes in both the mechanical properties and the color of heat-treated wood.