Abstract
Multi-functional ion beam assisted deposition (IBAD) equipment with 8 targets and 4 ion sources has been developed to synthesize coatings and multi-layers of many combinations. DLC, TiN, TiC coatings have been investigated with special attention paid to DLC. It is found that a narrow energy window exists at about 200 eV in order to serve more prominent diamond bondings and diamond-like properties. The surface is hard and smooth with a friction coefficient of less than 0.05. The improvement of the interfacial structure enables DLC coatings on 52100 steel to sustain uniform wear at high wear loads (up to 120 N). Applications of DLC and other coatings in material surface modification are being explored. By alternate sputtering, TiC/Metal multi-layers have been prepared. The individual layers vary in thickness from 1 to 10 nm and the periods vary from 3 to 18 nm. The ceramic phase has been maintained as TiC, whilst Fe, Cr, Nb, Zr, Ni, Cu and Al have been used as the metal phase. The hardness and toughness of these laminated nanocrystalline films have been investigated, the results showing the dependence of the properties on the modulation of the multi-layers as well as on the characteristics of the metal phase.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.