Abstract
As the utilization of composite materials flourishes in commercial aircraft, the use of Invar alloy with low coefficient of thermal expansion (CTE) for fabricating composite molds has gained prominence. The large-size composite molds can be fabricated by Wire-arc Directed Energy Deposition (Wire-arc DED), due to its high deposition efficiency and ability to form optimized topologies. However, the Wire-arc DED Invar components still exhibit heterogeneous microstructure, low strength and non-tunable CTE. To address these challenges, this study explores the integration of an ultrasonic energy field during the deposition process to systematically investigate its effects on microstructural evolution, mechanical properties and CTE of Invar alloy. The results reveal that the ultrasonic vibration-assisted deposition significantly refines the grain structure, resulting in a decrease of 81.04 % in grain size compared to the reference state. Moreover, the components fabricated by ultrasonic vibration assisted Wire-arc DED exhibit exceptional properties, with a yield strength (YS) of 408 ± 11.37 MPa, ultimate tensile strength (UTS) of 645 ± 7.61 MPa, and elongation (EL) of 31.3 %. Additionally, the correlation between grain size and CTE was established. The effectiveness of introducing an ultrasonic energy field in improving the mechanical properties and modulating the CTE of the components is further validated by rigorous theoretical calculations. This research provides a promising way to fabricate high performance Invar alloy composite molds.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have