Abstract

This work describes the preparation of mesoporous silica by the green reaction of rice husk ash (RHA) with glycerol, followed by the modification and the potential use as a drug carrier. The reaction was carried out at 215 °C for 2 h. The solution was further hydrolyzed with deionized water and aged for various times (24, 48, 120, 360, 528 and 672 h) before calcinations at 500 °C for 24 h. Further treatment of prepared mesoporous silica was performed using trimethylmethoxysilane (TMMS) to obtain hydrophobic Mesoporous silica. For all synthesized silicas, silica contents were as high as 95 wt %, whereas organic residues were less than 3 wt %. RHA-glycerol showed the highest specific surface area with smallest pore diameter (205.70 m2/g, 7.46 nm) when aged for 48 h. The optimal hydrolysis-ageing period of 120 h resulted in 500.7 m2/g specific surface area, 0.655 cm3/g pore volume and 5.23 nm pore diameter. The surface modification of RHA-glycerol occurred through the reaction with TMMS as confirmed by FTIR (Fourier-transform infrared spectroscopy). Ibuprofen was selected as a model drug for the adsorption experiments. The adsorption under supercritical CO2 was carried out at isothermal temperature of 40 °C and 100 bar; % ibuprofen loading of TMMS modified mesoporous silica (TMMS-g-MS) was 6 times less than that of mesoporous silica aged for 24 h (MS-24h) due to the hydrophobic nature of modified mesoporous silica, not surface and pore characteristics. The release kinetics of ibuprofen-loaded mesoporous silicas were also investigated in vitro. The release rate of ibuprofen-loaded MS-24h was much faster than that of ibuprofen-loaded TMMS-g-MS, but comparable to the crystalline ibuprofen. The slower release rate was attributed to the diffusion control and the stability of hydrophobic nature of modified silica. This would allow the design of a controlled release drug delivery system.

Highlights

  • Mesoporous silica materials have many superior advantages in which they can be employed in a wide range of industries such as catalysts, absorbents, nano-carrier for drug, pharmaceutics, insulation materials, rubbers, electronics, reinforced composite in plastics, cosmetics and biomedical and dental materials

  • The results showed that the hydrolysis-ageing time influenced the became very slow. The (BET) surface area, pore volume and pore size

  • Mesoporous silica materials at various hydrolysis-ageing periods were prepared from rice husk ash starting materials

Read more

Summary

Introduction

Mesoporous silica materials have many superior advantages in which they can be employed in a wide range of industries such as catalysts, absorbents, nano-carrier for drug, pharmaceutics, insulation materials, rubbers, electronics, reinforced composite in plastics, cosmetics and biomedical and dental materials. Mesoporous silica nanoparticles (MSNs) have recently been considered as promising materials to substitute the conventional drug carrier materials due to their large surface area, the possibility of tailoring the surface functionalities for smart targeted drug carriers [1,2] and the variation of the encapsulation [3]. These nanosized porous silica carriers provide more sustained. Anticancer drug resveratrol could be effectively loaded or encapsulated inside the mesopores of MCM-48 nanospheres without affecting its bioavailability [3]

Objectives
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call