Hydrometallurgical processing of technogenic finely dispersed fluorocarbon-containing raw materials of primary aluminum production

Abstract

The purpose of the paper is to determine the conditions for the maximum transition of fluorine from the technogenic raw materials of primary aluminum production (mature sludge) into solution under alkaline leaching. The object of research is the mature sludge, which is formed from technogenic finely dispersed materials of aluminum production in the baths with Soderberg anodes (tailings of coal foam flotation, gas cleaning sludge, electrostatic precipitator dust) and stored close to the enterprise. Analytical studies of the initial sample and leaching products have been carried out according to the certified methods using chemical, X-ray phase and titrimetric analysis methods. It is shown that, the main percentage of the three sludge components belongs to the dust of electrostatic precipitators (~ 79.7%) and coal foam flotation tailings (~ 15.8%). It has been determined that the gas cleaning sludge features the richest composition of useful components (in the sum of F, Na and Al ~ 63%). According to the data of X-ray phase analysis, the sludge sample from the sludge storage mainly contains cryolite (up to 78.7%), carbon (11.9%), calcium-magnesium carbonate from the dolomite series (4.44%), and trace amounts of corundum and fluorite. The results of the conducted experiments on fluorine leaching from the sludge sample by the caustic soda solution allow to estimate the main process parameters: temperature - 75–80°С, duration - 60 min, NaOH concentration - 3.0% (with the W:T ratio of 10:1 and a stirrer speed of ~ 1005– 1010 rpm). According to the analytical data on the chemical composition of leaching cake, the fluorine content in the solid phase reduces by 88.1%. The experiments carried out on alkaline leaching of fluorine from the sample of mature sludge formed under primary aluminum production by the electrolysis of cryolite-alumina melts in the baths with self-baking anodes allowed to find out that the maximum decrease of fluorine content in the sample is achieved under the conditions of maintaining the process parameters including temperature, duration, reagent concentration in optimal modes.