Abstract
Hybrid-phase-transition FETs (HyperFETs), built by connecting a phase transition material (PTM) to the source terminal of a FET, are able to increase the ON-to- OFF current ratio. In this article, we describe a comprehensive study carried out to explore the potential of these devices for low-power and energy-limited logic applications. HyperFETs with different ON– OFF current tradeoffs are evaluated at the circuit level. The results show limited improvement over conventional transistors in terms of power and energy. However, based on this analysis, this article proposes different design techniques to overcome the drawbacks identified in the study and thereby make better use of HyperFETs. Hybrid circuits, using both FinFETs and HyperFETs, and circuits combining different HyperFET devices are introduced and evaluated. At some frequencies, reductions of over 40% were obtained with respect to FinFET-only implementations, while minimum energy per operation values were obtained, which were lower than those achieved with low standby power (LSTP) FinFETs and high-performance (HP) FinFETs. This article also evaluates the impact of PTM transition time on the power performance of HyperFET circuits.
Highlights
C MOS technology has power density and energy inefficiency limitations associated with the minimum subthreshold slope (SS) of CMOS transistors (SS > 60 mV/decade)
Reductions of over 40% were obtained with respect to FinFET-only implementations, while minimum energy per operation values were obtained, which were lower than those achieved with low standby power (LSTP) FinFETs and high-performance (HP) FinFETs
Note that for HyperFET D and HyperFET E, supply voltage cannot be reduced because of the different minimum supply voltages allowed for HyperFETs and FinFETs
Summary
C MOS technology has power density and energy inefficiency limitations associated with the minimum subthreshold slope (SS) of CMOS transistors (SS > 60 mV/decade). Reductions of over 40% were obtained with respect to FinFET-only implementations, while minimum energy per operation values were obtained, which were lower than those achieved with low standby power (LSTP) FinFETs and high-performance (HP) FinFETs. This article evaluates the impact of PTM transition time on the power performance of HyperFET circuits.
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Journal on Exploratory Solid-State Computational Devices and Circuits
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
