High strain rate compressive behaviors and adiabatic shear band localization of 3-D carbon/epoxy angle-interlock woven composites at different loading directions

Abstract

When serving as a lightweight structural member in many areas, the dynamic mechanical behavior of fiber-reinforced polymeric matrix composites, especially under different strain rates, means a lot to the optimization of structure design as to high-speed impact. Under different loading rates and directions, we experimentally and numerically investigated the strain rate effect on the impact compressive behavior of 3-D angle-interlock woven composites (3-D AWCs) composed of carbon fiber and epoxy resin. Based on the factual geometrical architecture of 3-D AWC, the meso-scale model, which considers the interfacial damage between the reinforcements and matrix, was established to visually characterize the deformation history and damage morphologies of 3-D AWCs during impact compression process. Further, we performed high strain rate compressive tests on the split Hopkinson pressure bar (SHPB) apparatus integrated with a high-speed photography system for capturing images of progressive damage process to validate the proposed mesoscopic model. The stress-strain curves of various strain rates show strain rate effect varies depending on loading direction. The rate sensitivity on the compressive failure strength exists at weft direction and through-thickness direction except for warp direction. Moreover, both from images and finite element model results, the localized adiabatic shear band induced by intense plastic strain, initiates mainly from epoxy resin matrix and propagates along the interface at all three loading directions.