Abstract
This study explores the current-voltage characterization of tungsten disulfide Nano-Flakes (WS 2 NFs) Field-Effect-Transistor (FET) under various temperatures with a simple back-gate device structure. Due to the non-toxic nature of inorganic perovskite CsGeBr 3 (CGB), this material is applied to fabricate a CGB/WS 2 FET by drop-casting of lead-free perovskite CGB on the WS 2 NFs FET. The characterization of fabricated two FET devices has been performed under the illumination of a laser source (at a wavelength of ∼532 nm) with three different temperatures (298°, 313°, and 333° K). The output and transfer characteristics of CsGeBr 3 /WS 2 NFs FET illustrate that CGB is very effective in boosting the photocurrent and performance of the FET. For each two FET devices, increasing the temperature led to a decrease in drain-source current (I ds ), whereas the rate of I ds reduction in CGB/WS 2 NFs FET is roughly two times less than WS 2 NFs FET. The results demonstrate that the conductivity and I ds of the CGB/WS 2 NFs FET have been doubled compared to the bare WS 2 -NFs FET. Most importantly, the CGB/WS 2 NFs FET shows higher external quantum efficiency, photo-responsivity, and detectivity in comparison with the WS 2 NFs FET. The superior photo-sensing properties of the CGB/WS 2 NFs FET are very promising to extend the two-dimensional optoelectronic devices with excellent performance. • CGB is effective in boosting the photocurrent. • I ds reduction rate in CGB/WS 2 NFs FET with increasing temperature is roughly two times less than WS 2 NFs FET. • Conductivity and I ds of the CGB/WS 2 NFs FET double compared to the bare WS 2 -NFs FET. • CGB/WS 2 NFs FET shows higher external QE, photo-responsivity, and detectivity in comparison with WS 2 NFs FET.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call