Abstract
A new metal organic deposition (MOD) process using precursor solution containing metal trifluoroacetates was developed to improve in-field performance. In this process, the pinning centers of BaMO3 (M: metal elements such as Zr and Hf) materials could be made to be finer by reducing the once coating thickness in the coating and calcination step. This is referred to as the ultra-thin once coating (UTOC)-MOD process. This process improves the in-field performance. The UTOC-MOD process also has the advantage of uniformity of 2-dimensional Jc-distribution, which was determined using a scanning hall-probe microscopy analysis. Improvement of the Jc uniformity was also confirmed based on scribed tapes. A smaller dispersion of the filament-critical current values in the UTOC-MOD tape was determined based on a comparison with the results for obtained by a conventional process. With respect to the mechanical strength, it was established that the dispersion of the delamination strength, which was evaluated using stud-pull equipment, was suppressed. Microstructural analysis revealed that, the UTOC films were pore-free, although large pores are present in the films when conventional MOD is utilized. This difference in the microstructure can be attributed to the aforementioned improvement in the uniformity of the UTOC-MOD films.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
